Glazier cover letter examples by experience level

Use this example

In short, a glazier cover letter is a one-page letter that tells a glazing contractor which systems you install, what glass you have set, and which certification is yours rather than your employer's.

In practice, glazing shops hire against a scope, not a job title. For example, they are short of curtain wall installers for a tower package, or of a storefront and door mechanic for service work, and those are different people. A letter that names the scope in the first two sentences answers the question that made them post the job.

Guide to a glazier cover letter

To help, this guide and the corresponding glazier cover letter example will cover:

• First, how to structure the letter, paragraph by paragraph
• Next, why the system name belongs in the first sentence
• The AGMT and NACC distinction, and how to write it correctly
• What to write when the posting does not say which scope they are short on
• Finally, the openings that get shops calling a glazier back

How to write a glazier cover letter

A glazier cover letter example you can adapt

Dear Mr. Petrakis,
I am applying for the Glazing Foreman post at Cascade Curtainwall Contractors. I have 17 years in the trade, 6 of them running curtain wall crews of 4 to 11 in the Puget Sound region, and I hold AGMT installer certification in my own name. Unitized and stick-built curtain wall, window wall, storefront and two-sided structural silicone glazing are all scopes I have run rather than only worked on.
The project I would point to is a 14-story core and shell where we set 118,000 square feet of unitized curtain wall and hit the general contractor's original enclosure dates. We ran 2 to 4 floors a week off a monorail and dolly system, and the reason it held was the mockup: we found two anchor conflicts between the shop drawings and the as-built embeds before a single cassette shipped. I also ran the water test witness and the in-situ structural silicone checks on that package, and glazed a fire-rated atrium opening against its listing and label.
I know your shop holds North American Contractor Certification, which is why I am writing to you rather than to a general contractor. A shop certified at company level runs the mockup and the quality documentation the way I have been trained to, and I would rather work inside that than spend half a job arguing for it. I would take a tower enclosure package or a mixed window wall and storefront scope, whichever you are short on.
I hold AGMT certification, current aerial lift, forklift, rigging and signaling authorizations, and I have trained four registered apprentices to topping out. I can give three weeks' notice. Thank you for your time.
Sincerely,
Sione Fonoti

Openings that work

AGMT is yours. NACC is your shop's.

This is the easiest way to lose credibility in a glazing cover letter, and it happens because the two names sit next to each other on the same website.

The Architectural Glass and Metal Technician certification, AGMT, is the program for glazing installers: it certifies you or your personnel. The North American Contractor Certification, NACC, is the program for glazing contractors: it certifies the company. An independent third party, AMS, Inc., administers both, and the Architectural Glass and Metal Certification Council, a not-for-profit public benefit organization, sponsors and oversees both (glazingcertification.com, retrieved 17 September 2026).

In other words, write "I hold AGMT installer certification" about yourself, and "your shop holds NACC" about them, which is a good thing to notice and a reason to have picked them. However, you must not write "NACC certified" next to your own name: the person reading it is a glazing contractor and will know exactly what you have done.

When the posting does not say which scope they are short on

Of course, plenty of glazing job posts say "glazier wanted" and nothing else. Do not guess and do not hedge. Lead with the scope you are strongest in, then offer the rest in one sentence: "I am strongest on unitized curtain wall, and I have run window wall, storefront and rated openings as well, so I can go where you are short." That reads as a tradesperson who knows their own depth.

Even so, if the shop's website lists projects, read them for ten minutes first. One accurate sentence about a building they enclosed is worth more than a paragraph about your work ethic, and it is the part of the letter that cannot be reused.

Length, format and sending it

One page, four paragraphs, 250 to 400 words. PDF unless the portal says otherwise, named for yourself and the post: sione-fonoti-glazing-foreman-cover-letter.pdf. Address a person where you can; glazing shops are small enough that their sites usually name the operations manager or general foreman. Use the same numbers as your resume so the two agree. Our glazier resume example is written with the figures used here.

Key takeaways

1. To start, name the system in the first two sentences: unitized, stick, window wall or storefront.
2. Then give one project with square footage or a panel count, and say what went right.
3. Write AGMT under your own name and NACC as your shop's.
4. Say whether structural silicone work was two-sided or four-sided.
5. Name one real thing about their projects, taken from their own pages.
6. Close with certification, equipment authorizations and your notice period.
7. Keep it to one page and address a person.

Write your glazier cover letter in 10 minutes with our AI cover letter builder.