NEWPractice your interview out loud with an AI voice coach.Practice interviews out loud.Try it →

Engineering resume examples & templates

An engineering resume is a one to two page document that establishes four things fast: an accredited degree, where you sit on licensure, what you have delivered, and the tools you already work in. This guide gives you three adaptable versions, a linked index of every engineering career on Rezoom, and current Bureau of Labor Statistics pay for the main engineering occupations.

Median pay
$99,520Architecture and engineering occupations, May 2025, BLS

Mid-level · Modern template

Ingrid Vasquez-Holm PE
Mechanical Engineer, Thermal and Structural Analysis
ingrid.vasquez-holm@example.com(256) 555-0108Huntsville, United States

06Profile

Licensed mechanical engineer with eight years in aerospace ground systems, PE registered in Alabama and comity-registered in Florida and Texas through an NCEES Record. Responsible engineer on 14 pressure and thermal systems from $250,000 to $11 million in build value, designed to ASME B31.3 and Section VIII. Led the redesign of a cryogenic transfer line that cut boil-off losses by 19 percent across two test campaigns.

01Work Experience

Mechanical Engineer, Ground SystemsRedstone Aerospace Systems, Huntsville, United States
10 Jun 2019 – Present
  • Responsible engineer on 14 pressure and thermal systems from $250,000 to $11 million in build value, designed to ASME B31.3 and ASME Section VIII under AS9100 configuration control.
  • Led a cryogenic transfer line redesign that cut boil-off losses by 19 percent across two test campaigns, verified against instrumented flow data rather than model output.
  • Ran thermal and structural analysis in ANSYS Mechanical across 41 load cases for three flight-support assemblies; all margins closed positive at critical design review with no waivers.
  • Released 214 drawings in NX and chaired the discipline drawing review, taking release cycle time from 19 days to 11.
  • Managed 6 machining and fabrication suppliers through first article, closing 23 supplier deviation requests.
Mechanical Design EngineerTennessee Valley Machine Works, Decatur, United States
8 Jan 2018 – 31 May 2019
  • Designed welded frames and pressure-retaining weldments for a fabricated metal products line, 40 to 60 released drawings a year.
  • Introduced GD&T to ASME Y14.5 on two part families, cutting supplier clarification requests by roughly half.

02Education

Master of Science in Mechanical Engineering, Thermal SciencesThe University of Alabama in Huntsville, Huntsville, United States
Aug 2022 – May 2024

Part-time while working. Thesis on boil-off modeling in cryogenic transfer lines.

Bachelor of Science in Mechanical EngineeringAuburn University, Auburn, United States
Aug 2014 – May 2018

ABET-accredited program.

03Skills

ASME B31.3 and Section VIII design
Thermal and structural FEA in ANSYS
NX and Teamcenter
GD&T to ASME Y14.5
AS9100 configuration control
Supplier first article management
Qualification test planning

04Certificates

Professional Engineer, Mechanical, AlabamaAlabama Board of Licensure for Professional Engineers and Land Surveyors
Apr 2023

Comity registration in Florida and Texas through NCEES Record #52807.

Six Sigma Green BeltAmerican Society for Quality
Jun 2021

05Languages

EnglishNative
SpanishProficient
Norwegianintermediate
Hover the page to read it up close
Engineering resume example
On this page
  1. Resume guide for an engineering resume
  2. How to write an engineering resume
  3. Choosing the best resume format for an engineering resume
  4. Include your contact information
  5. Make use of a summary
  6. Right vs wrong: the same engineering summary, twice
  7. Outline your experience
  8. The four things an engineering resume has to establish, whatever the discipline
  9. Build a snapshot of your key skills
  10. List your education and certifications
  11. Choose the right layout and design
  12. The size and shape of the engineering sector
  13. What the main engineering occupations pay
  14. Every engineering career on Rezoom
  15. Key takeaways for an engineering resume
  16. Related engineering resume examples
  17. FAQ

An engineering resume is a one to two page document that has to establish four things before a reader decides whether to keep going: that your degree is accredited, where you sit on licensure, what you have actually delivered, and which tools you already work in.

Those four hold whether you design bridges, write control logic, run a reactor, or specify air handling units. However, the discipline changes what goes in each slot. It does not change the slots.

This is the sector hub. In short, it covers what is common to every engineering resume, and links to the discipline-specific guide for each career in the category.

Resume guide for an engineering resume

For this reason, this guide and the corresponding engineering resume example will cover:

  • First, the four things every engineering resume has to establish, in any discipline
  • Then, how to write each section, and what engineers habitually get wrong in them
  • Next, three adaptable summaries: graduate engineer, licensed engineer and engineering manager
  • Also, how big the engineering sector is and what its main occupations pay
  • Finally, a linked index of every engineering career guide on Rezoom

How to write an engineering resume

Overall, six sections: contact header, summary, credentials and licensure, experience written as projects or products, education, and a technical stack. As a rule, one page for the first five or six years, then two once you have a license or a delivery record worth listing.

Credentials go above experience. In engineering they function as a gate rather than an achievement, and the reader is checking them before they read anything else.

SectionWhat it is answeringWhere it goes

  1. Credentials and licensureCan this person sign, seal or certify, and if not, when?Directly under the summary
  2. ExperienceWhat did they deliver, at what size, and which part was theirs?Reverse chronological, project or product lines inside each job
  3. Technical stackWhich software, codes and standards do they already work in?Grouped block near the end
  4. EducationIs the degree ABET-accredited, and in what?Include the accreditation; it is a licensure prerequisite
Expert tip

Name the accreditation, not just the degree

ABET accredits 4,863 programs at 950 colleges and universities across 42 countries, and more than 200,000 students graduate from an accredited program each year (ABET, accessed September 2026).

That matters beyond prestige. The most commonly accepted route to a Professional Engineer license runs through a bachelor's degree from an EAC/ABET-accredited program, then the Fundamentals of Engineering exam, then four years of acceptable, progressive and verifiable experience, then the PE exam (NCEES, accessed September 2026).

So write "BS Mechanical Engineering, ABET-accredited, Auburn University, 2019" rather than "BS Mechanical Engineering". One word tells a reader that you are on the licensure path, or could be. Its absence makes them wonder.

Run the finished file through the free ATS checker before you send it. Engineering firms, manufacturers and every public agency parse applications into a system before a person opens one.

Choosing the best resume format for an engineering resume

Reverse chronological, in every discipline. In other words, one page early, two once the record justifies it.

Functional and skills-first formats fail in engineering for a specific reason: in the licensed disciplines the timeline is itself a credential, because a state board will eventually want to know who supervised you and for how long. In the unlicensed disciplines the timeline still carries the argument, because seniority in engineering is measured in product cycles, project phases and build seasons, and a format that hides the dates hides the count.

Include your contact information

Right
Ingrid Vasquez-Holm, PEMechanical Engineer, Thermal and Structural AnalysisPE, Alabama #PE-38714. NCEES Record #52807.(256) 555-0108, ingrid.vasquez-holm@example.com, Huntsville, AL
Wrong
Ingrid Vasquez-HolmEngineering professional with a strong technical backgroundLicensed engineer(256) 555-0108, ingrid_engineer88@example.com

Put the license number on the page if you hold one. It gets verified anyway, and prequalification packages ask for it. If you do not hold one, put what you do hold: the FE pass date, the EIT number, the certification body.

Make use of a summary

Specifically, four lines: discipline, credential position, the kind and size of work you handle, and one delivered outcome with a number on it.

Graduate engineer adaptable resume summary example

Mechanical engineer with a BS from the ABET-accredited program at Auburn University, FE Mechanical passed October 2023, and Engineer in Training registration in Alabama. Two years of supervised design work on launch vehicle ground support equipment, including thermal and structural analysis in ANSYS Mechanical and detail modeling in NX. Released 84 drawings across three assemblies to AS9100 configuration control, with no design-caused rework at first article.

Licensed engineer adaptable resume summary example

Licensed mechanical engineer with eight years in aerospace ground systems, PE registered in Alabama and comity-registered in Florida and Texas through an NCEES Record. Responsible engineer on 14 pressure and thermal systems from $250,000 to $11 million in build value, designed to ASME B31.3 and Section VIII. Led the redesign of a cryogenic transfer line that cut boil-off losses by 19 percent across two test campaigns.

Engineering manager adaptable resume summary example

Engineering manager with 16 years of practice, 10 of them licensed, leading a group of 12 mechanical and systems engineers against a $9.4 million annual labor plan. PE in three states, responsible engineer on more than 40 systems, and technical authority on a $54 million test stand upgrade delivered inside budget and seven weeks early. Run the discipline's design review gates and mentor six engineers through the FE and PE sequence.

Right vs wrong: the same engineering summary, twice

Right
Licensed mechanical engineer with eight years in aerospace ground systems, PE in Alabama with comity in Florida and Texas.Responsible engineer on 14 pressure and thermal systems from $250,000 to $11 million in build value.Led a cryogenic transfer line redesign that cut boil-off losses by 19 percent across two test campaigns.
Wrong
Results-driven engineer with a proven track record of success.Experience with a wide range of engineering projects of varying complexity.Involved in all phases of the engineering lifecycle from concept to delivery.

In practice, the right column can be staffed onto a proposal, priced, and put in front of a customer. The left column cannot, and yet the person reading is doing exactly that.

Outline your experience

Employer, city, dates, title. Then lines that describe deliverables, not duties. For example, a usable line names the thing, its size, the standard or method it was built to, and the part that was yours.

  • Instead ofWorked on a variety of engineering projects
    UseResponsible engineer on 14 pressure and thermal systems, $250,000 to $11 million build value, ASME B31.3 and Section VIII
  • Instead ofResponsible for design and analysis
    UseRan thermal and structural analysis in ANSYS Mechanical for 3 flight-support assemblies, 41 load cases, all margins positive at CDR
  • Instead ofUsed CAD software
    UseReleased 214 drawings in NX under AS9100 configuration control, including the tolerance stack-up for the interface plate
  • Instead ofAssisted with testing
    UseWrote and ran 9 qualification test procedures, including 2 proof pressure tests witnessed by the customer
  • Instead ofCoordinated with vendors
    UseManaged 6 machining and fabrication suppliers through first article, closing 23 supplier deviation requests
  • Instead ofImproved a process
    UseCut drawing release cycle time from 19 days to 11 by rebuilding the checker queue and the title block template

Adaptable resume employment history example

Mechanical Engineer, Ground Systems, Redstone Aerospace Systems, Huntsville, AL, June 2019 to Present

Responsible engineer on 14 pressure and thermal systems from $250,000 to $11 million in build value, designed to ASME B31.3 and ASME Section VIII and delivered under AS9100 configuration control.

Led the redesign of a cryogenic transfer line that cut boil-off losses by 19 percent across two test campaigns, verified against instrumented flow data rather than model output.

Ran thermal and structural analysis in ANSYS Mechanical across 41 load cases for three flight-support assemblies; all margins closed positive at critical design review with no waivers.

Released 214 drawings in NX and chaired the discipline's drawing review, taking release cycle time from 19 days to 11.

Mentored two engineers in training through qualifying experience and the PE exam, both licensed in 2025.

The four things an engineering resume has to establish, whatever the discipline

Indeed, disciplines differ in almost everything except this. Get these four onto the page in the first half, and as a result the rest of the resume gets read.

One: the accredited degree. Name the discipline and the accreditation, because ABET accreditation is the normal prerequisite for the licensure route (NCEES, accessed September 2026) and many federal and defense postings screen for it directly. If your degree is in engineering technology rather than engineering, say so plainly; it is a different accreditation commission and pretending otherwise fails at the background check rather than at the resume.

Licensure position on an engineering resume

Two: where you sit on licensure. Engineering splits into disciplines where a license decides your ceiling and disciplines where it barely appears. Civil and structural work is the licensed end: public work needs a seal. Mechanical, electrical, chemical, fire protection and control systems all have PE paths and use them selectively. Software, systems, manufacturing and most research engineering rarely license at all. NCEES member boards counted 1,021,124 licensed professional engineers in 2025, and administered 57,902 FE exams and 29,838 PE exams over the year (NCEES, Squared 2025, published March 2026).

Whichever end you sit at, say it explicitly, because silence reads as the weaker answer:

Your positionWrite it as
LicensedPE, Alabama #PE-38714, with comity registration in Florida and Texas through NCEES Record #52807
Part wayFE Mechanical passed October 2023. EIT, Alabama #EI-11420. Qualifying experience from November 2023 under a licensed PE. PE exam scheduled April 2027.
Not on the path, by choiceNot pursuing PE licensure; work is in non-exempt product development. Certifications: Six Sigma Black Belt, CSWP.

Engineering project lines and tool stack

Three: the project or product line. Every engineering discipline produces a countable unit of delivery. In civil and structural it is the project, with a construction value and a delivery method. Manufacturing, by contrast, counts the part, the line or the takt time. For product engineering, it is the program and the build phase. In process engineering it is the unit, its throughput and its turnaround. Find your unit, count it, and write in it.

Four: the tool stack, named by version where it matters. Engineering hiring is unusually literal about software. A shop that runs NX will read Creo as a six-month ramp; a firm on Civil 3D reads MicroStation the same way. List the tools you can be productive in this month, separately from the ones you have touched, and name the codes and standards alongside them, because in engineering the standard is as much a tool as the software.

Do

  • Name the accreditation on the degree line.
  • State your licensure position even when the answer is that you are not pursuing one.
  • Count the unit your discipline delivers in.
  • List codes and standards next to software.
  • Give one number per experience line.
  • Separate the tools you are current in from the ones you have seen.

Don’t

  • Do not write "various engineering projects" when a count and a value range exist.
  • Do not claim a software package you last used at university.
  • Do not describe yourself as a team player or a problem solver; every engineer is claiming both on the same page.
  • Do not bury the license number in a certifications block at the bottom.
  • Do not send a two-column template into a defense or agency portal.

Build a snapshot of your key skills

Usually, twelve to sixteen entries in four groups: analysis, tools, codes and standards, and delivery. The codes group is the one most engineers leave out, and it is the one that proves you have worked inside a real compliance environment rather than a design exercise.

Adaptable resume skills example

Analysis: Thermal and structural finite element analysis, Tolerance stack-up, Fluid and pressure system sizing, Failure modes and effects analysis, Design of experiments, Root cause analysis

Tools: NX and Teamcenter, ANSYS Mechanical and Fluent, MATLAB, Python for data reduction, Minitab, Windchill

Codes and standards: ASME B31.3, ASME Boiler and Pressure Vessel Code Section VIII, ASME Y14.5 geometric dimensioning and tolerancing, AS9100 configuration control, MIL-STD-1522

Delivery: Design review gate ownership, Requirements traceability, Supplier first article management, Test procedure authoring, Technical proposal writing, Mentoring engineers in training

List your education and certifications

Degree, discipline, accreditation, institution, year. Then licensure with numbers and states. Then certifications with their issuing body, because in engineering an uncredited certification name means nothing.

Adaptable resume education and certifications example

BS Mechanical Engineering, ABET-accredited, Auburn University, Auburn, AL, 2019

MS Mechanical Engineering, Thermal Sciences, The University of Alabama in Huntsville, 2024

Licensure: PE, Alabama #PE-38714, 2025. Comity registration in Florida and Texas through NCEES Record #52807. FE Mechanical passed October 2023.

Certifications: Certified SolidWorks Professional, Dassault Systemes (2021). Six Sigma Green Belt, ASQ (2023). DoD Secret clearance, active, last investigation 2024.

Choose the right layout and design

In general, single column, plain type at 11 or 12 point, clear headings, no photograph. After all, two-column templates, text boxes and skill rating graphics break the parsers used by large engineering employers and by every federal contractor portal.

Also keep the numbers unexported and the acronyms spelled once. A discipline lead and a recruiter who is not an engineer both read an engineering resume, often in that order; therefore, the acronym that saves the first reader two seconds costs the second reader the whole page.

The size and shape of the engineering sector

Engineering is a high-paying sector growing faster than the labor market as a whole, and the growth is concentrated in a few disciplines rather than spread evenly.

MeasureValue
Median annual wage, architecture and engineering occupations, May 2025$99,520
Median annual wage, all occupations, May 2025$50,980
Projected growth, architecture and engineering, 2025-35Much faster than the average for all occupations
Projected annual openings, architecture and engineering~174,800
Architectural and engineering manager jobs, 2025220,900
Median annual wage, architectural and engineering managers, May 2025$171,270
Source: U.S. Bureau of Labor Statistics, Occupational Outlook Handbook, May 2025 wage data and 2025-35 employment projections.
Expert tip

The growth sits in industrial and mechanical, not where most applicants assume

Across the decade to 2035, industrial engineering is projected to grow 12 percent and add 45,400 jobs, and mechanical engineering 11 percent and 33,500 jobs, against 8 percent for electrical and electronics engineering, 6 percent for civil engineering and 5 percent for chemical engineering (BLS Occupational Outlook Handbook, 2025-35 projections).

The absolute numbers reorder that again. Civil engineering is the largest of the five at 380,600 jobs in 2025 with about 22,700 openings a year, and industrial engineering is close behind at 365,100 jobs with about 23,100 openings; chemical engineering, at 21,900 jobs and about 1,100 openings a year, is a small occupation whatever its growth rate says (BLS Occupational Outlook Handbook, May 2025).

For a resume that means the discipline you name in the first line changes how many doors it fits. If your record straddles two disciplines, which many manufacturing and facilities careers do, write the header to match the posting rather than your degree, and let the education section carry the degree.

What the main engineering occupations pay

There is no single engineering wage. The spread between disciplines is wider than the spread inside most of them, and it is set by industry rather than by negotiation.

OccupationMedian annual wage, May 2025Typical entry education
Architectural and engineering managers$171,270Bachelor's degree plus experience
Computer hardware engineers$161,740Bachelor's degree
Petroleum engineers$144,910Bachelor's degree
Aerospace engineers$134,960Bachelor's degree
Nuclear engineers$133,970Bachelor's degree
Chemical engineers$125,040Bachelor's degree
Electrical and electronics engineers$125,040Bachelor's degree
Health and safety engineers$115,160Bachelor's degree
Materials engineers$112,860Bachelor's degree
Environmental engineers$107,110Bachelor's degree
Mechanical engineers$104,110Bachelor's degree
Industrial engineers$102,440Bachelor's degree
Civil engineers$100,840Bachelor's degree
Agricultural engineers$98,590Bachelor's degree
Mechanical engineering technologists and technicians$74,510Associate's degree
Machinists$58,750High school diploma or equivalent
Source: U.S. Bureau of Labor Statistics, Occupational Outlook Handbook, May 2025 wage data.

Two patterns are worth reading off that table before you write a word. The first is that the top of it is management, not seniority inside a discipline: architectural and engineering managers had a median of $171,270 in May 2025 against $104,110 for mechanical engineers, which is why the technical-authority line on a senior resume matters as much as the headcount line. The second is that, by contrast, the gap between an engineering degree and an engineering technology or trade route is real and visible, with mechanical engineering technologists and technicians at $74,510 and machinists at $58,750 (BLS Occupational Outlook Handbook, May 2025). If you are moving between those tracks, the resume has to argue the move explicitly rather than hope the reader does the work.

Every engineering career on Rezoom

From there, each link goes to a full resume guide for that career, with three adaptable examples and current pay and outlook data.

Civil and structural

Mechanical and manufacturing

Electrical and systems

Process and chemical

Facilities and safety

Project delivery and research

Technician and trades

Sector guide

Key takeaways for an engineering resume

  1. To start, establish four things early: accredited degree, licensure position, delivery record, tool stack.
  2. Next, write "ABET-accredited" on the degree line, because it is the licensure prerequisite and a common screen.
  3. State where you sit on licensure even when the answer is that you are not pursuing it.
  4. Then find the unit your discipline counts in, and write every experience line in that unit.
  5. List codes and standards beside software; both are tools in engineering hiring.
  6. Separate current tools from tools you have seen, because hiring reads the list literally.
  7. Keep it single column and parseable, since firm and agency portals read it before a person does.
Pair it with a matching engineering cover letter.

Engineering resume questions, answered

How long should an engineering resume be?

One page for the first five or six years. Two once you hold a license, lead a discipline, or have a delivery record long enough that cutting it costs the reader information. Three is a curriculum vitae, and outside research engineering nobody in this sector asked for one.

Do I need a PE license to get an engineering job?

In most disciplines, no. Licensure decides your ceiling in civil, structural and other work that goes to a seal for public projects, and it is optional to rare in software, systems, manufacturing and most product engineering. NCEES member boards counted 1,021,124 licensed professional engineers in 2025 (NCEES, Squared 2025, March 2026), against a much larger working engineering population, so the honest answer for most postings is that the license is a differentiator rather than a gate. Say where you stand either way.

Does ABET accreditation actually matter on the resume?

Yes, for two reasons. It is the standard prerequisite for the licensure path (NCEES, accessed September 2026), and many defense, federal and large-firm postings screen for it in the application form. ABET accredits 4,863 programs at 950 institutions in 42 countries (ABET, accessed September 2026), so if your program qualifies, the word costs you nothing and answers a question the reader would otherwise hold open.

How do I write an engineering resume with no experience?

Write the projects as jobs. A capstone with a sponsor, a build season, a co-op rotation and a research assistantship all have a scope, a budget or a bill of materials, a team size, a schedule and an outcome. Give each one those five things, put the FE exam date on the page if you have taken it, and list the software you can be productive in this month. A graduate who can be handed a CAD seat and a checklist is a real hire.

Which engineering discipline pays best?

By median, computer hardware engineers at $161,740, petroleum engineers at $144,910 and aerospace engineers at $134,960 led the disciplines as of May 2025, with architectural and engineering managers above all of them at $171,270 (BLS Occupational Outlook Handbook, May 2025). Industry matters as much as discipline, and the management step is usually the largest single move in the table.

Should I use a different resume for each engineering discipline I have worked in?

Yes, and it is the most useful hour you will spend. Many engineering careers straddle two disciplines, and the header line decides which pile you land in. Keep one master record and generate a version whose title, summary and tool stack match the posting, leaving the degree to sit in the education section where it belongs.

Written by the Rezoom Career Team The team behind Rezoom’s resume builder and ATS checker

How we write these guides: pay and outlook figures come from the U.S. Bureau of Labor Statistics, every statistic links to its source, and the example resumes are written for this page, with made-up people and numbers. Meet the Rezoom authors.

Published Last updated

More Engineering resume examples, three levels each

Each has its own guide, wording to copy and a matching cover letter.

Engineering resume templates

Every template is ATS-friendly. Switch any time and your content moves with you.

CalmSingle column, soft blue accents ClassicEditorial serif headings SmartColor band, labels on the left FunctionalBold name, labels in the margin

Build your engineering resume from this example.

Open it in the builder, tailor it to the job post and check your ATS score before you apply.

Copied